HD10 Series

How-to instruction video for the DEUTSCH HD10 Series.

Contact Insertion

  1. Grasp the contact-wire assembly between the thumb and forefinger on the wire approximately one inch behind the contact crimp barrel.
  2. Hold the connector with the rear grommet facing you.
  3. Push the contact straight into the connector grommet until a positive stop is felt. The retaining fingers in the connector will snap behind the shoulder of the contact and lock it in place. A slight tug will confirm that it is properly sealed.

Contact Removal

  1. With rear insert toward you, snap the appropriate size plastic tool over the wire of the contact to be removed.
  2. Slide the tool along the wire into the insert cavity until it engages the contact and resistance is felt. The contact retaining clip will be in the unlocked position.
  3. Pull the contact-wire assembly out of the connector.

Product Finder

The Interactive Product Finder is designed to show connector options that meet your design requirements.

Need Help?

At LADD Distribution, we strive to exceed our customers’ expectations. If you are unable to find the information you are looking for, feel free to contact us.

Contact Us